This sensor can be added to a control unit in order to have the wet bulb temperature | Relative humidity is calculated via MyFrolight platform

The Frolight generator starter is a self-contained device with its own battery and solar panel, operating based on temperature. When the temperature falls below a preset level, it closes a potential-free (dry) contact. This contact can be connected to almost any brand of generator, enabling the generator to start automatically when required.

This Temperature sensor can be added to your Frolight system to capture the dry temperature at a second position.

This metal base is used to install the Frolight Control Unit at height. One is already included for every control unit bought.

For Max 600 meters of Frolight IR-TUBE

This cable is used to extend the length of the power cable of a control unit with 5 meters

Extension cable that can be used to extend the power cord of a Frolight Control Unit Master or Slave

This cable is used to extend the length of the power cable of a control unit

This cable is used to extend the length of the power cable of a control unit

Tape Binding Tool to fix IR-TUBE. To be used with Max Tape [FLAMT-TB01] and Staples [FLAMT-ST01]

An IR tube has 10 meters of power cable to reach the control unit. If this is not sufficient, an extension cable can be used to extend the length with an extra 5 to 100 meters.

An IR tube has 10 meters of power cable to reach the control unit. If this is not sufficient, this cable can be used to extend the length with an extra 30 meters.

Large PVC spool for use with the FLAFW Hydraulic Fix Winder, capable of winding up to 600 meters of IR-TUBE.